Gas-powered and powder-actuated (PA) prowess have been Ramset’s wheelhouse for decades. The construction tool brand has its fingerprints on sites across Australia, setting itself apart with heavy-duty power and cutting-edge innovation.
Aussie worksites are no stranger to being hardcore.
Some are dusty and hot, others are rigid and freezing. There’s no telling what kind of conditions you’ll be walking into when you head out to a job.
Ramset has been with tradies every step of the way, setting the standard when it comes to PA and gas-powered tools build for big-time applications where batteries and cords won’t do it.
All gas, no breaks
Look no further than Ramset’s gas-powered tools range as an example of why they’ve been industry leaders as long as they’ve been.
Combining power, speed and portability, modern gas tools deliver the high shooting volumes of traditional fixing systems without the bulk, hoses or downtime that can slow a job down.
Front of the pack are the TrakFast 65, TrakFast C-Plus and CableMaster C-Plus. Designed for demanding construction environments, the Ramset TrakFast 65 sits at the top of the lineup as the brand’s most powerful gas-powered cordless tool.
Delivering an impressive 105J of impact power, the TrakFast 65 can drive pins from 15mm through to 65mm into concrete, masonry and steel, giving tradies the flexibility to handle a wide variety of applications with a single tool.
Its rapid cycle rate of up to two to three nails per second also makes it one of the fastest tools in its class, helping tradies maintain productivity on large-scale projects.
The Tradie took the TrakFast 65 for a test with carpenter Nathan “Nath” Dowell on-site and immediately noticed the difference.
“You can tell this is the most powerful nailer of its kind on the market right now,” Nath said.
Putting the tool through its paces, Nath used it for a range of applications including pinning timber to concrete, fixing timber sheeting and installing steel c-channels.
“This is amazing,” Nath said.
“I was really impressed … I can’t fault this at all, it handled everything I threw at it.
”The ability to fire up to 65mm pins also provides added versatility for thicker structural fixings.
“Being able to shoot 65s makes light work for pinning down thicker frames and c-channel,” Nath added.
“I don’t need to change anything with the tool, I can just slide the smaller pins out and chuck the big 65mm ones in and away we go.”
Beyond raw power, the TrakFast 65 has been designed with convenience and endurance in mind.
The lightweight, well-balanced body helps reduce fatigue across long days on site, while reduced recoil and vibration improve user comfort.
With up to 10,000 shots per battery charge and a high-capacity gas canister capable of completing an entire residential frame, the tool also minimises interruptions.
“It leaves my old tool in the dust,” Nath said.
Alongside the TrakFast 65, Ramset’s TrakFast C-Plus provides a compact yet powerful option designed specifically for track and bracket installation.
Lightweight and well balanced, the tool delivers 95J of power to drive fasteners into concrete, masonry and steel, while its reduced actuation force and improved dust control support safer and more comfortable operation.
Rounding out the range is the CableMaster C-Plus, a gas-powered tool purpose-built for plumbing, data and electrical installations.
Compact yet capable, it offers increased power over its predecessor and the ability to drive up to 10,000 nails per charge.
Its slimline nose improves sightlines when installing clips and fixtures, while the soft grip design enhances control and comfort during repetitive tasks.
Together, the TrakFast 65, TrakFast C-Plus and CableMaster C-Plus highlight the strengths of modern gas-powered technology.
Powdered power
While gas-powered tools offer speed and mobility, PA tools remain the big dogs when it comes to demanding power and efficiency when fixing into tough substrates.
Designed to drive hardened fasteners directly into concrete or steel, PA tools allow tradies to complete structural fixing tasks quickly and reliably without the need for pre-drilling or anchors.
At the centre of this category is the FrameBoss XPM from Ramset, a heavy-duty powder-actuated tool engineered to deliver high performance across framing, fixing and formwork applications.
Delivering an impressive 400 joules of impact energy, the tool provides the power required to drive fasteners securely into demanding materials such as concrete, steel and dense structural elements.
An adjustable power dial also allows users to fine-tune the force delivered on each shot, helping achieve consistent depth without changing loads.
One of the major advantages of powder-actuated tools like the FrameBoss XPM is the ability to deliver powerful direct fixings quickly.
By eliminating the need to drill holes or install anchors beforehand, PA tools dramatically reduce installation time on large construction projects.
This makes them particularly valuable for trades working on high-volume tasks such as bottom-plate fixing, formwork installation or structural framing where efficiency is essential.
The FrameBoss XPM’s unique collated magazine system also helps to make each use a breeze.
Unlike traditional single-shot PA tools, the FrameBoss XPM can fire up to 10 pins before needing to reload, with fasteners up to 75mm long.
For single-shot applications, the tool can also fire nails up to 100mm in length, providing additional versatility for heavier fixing jobs.
SEE MORE: Tradie Tough Tests
Ramset Product Manager Simon Babcock said the capacity and power of the FrameBoss XPM made it the premium choice in Australia for its line of work.
“If you want efficiency and the strongest tool, you go for the FrameBoss,” he said.
Beyond power and versatility, powder-actuated tools are also prized for their ability to simplify complex
fixing tasks.
With specialised fasteners designed to penetrate both steel and concrete, PA tools reduce the need to carry multiple fastening systems on site.
Instead of switching between drills, anchors and screws depending on the material, tradies can often complete the job using a single tool and the appropriate fastener.
For contractors working across multiple dwellings or multi-residential developments, the speed of powder-actuated tools can significantly reduce installation time.
Even small improvements in efficiency can add up quickly across dozens of frames or structures, helping teams keep projects on schedule.
Complementing the FrameBoss XPM is the JobMaster, another powder-actuated solution from Ramset designed for versatility across residential and commercial construction.
Built as a semi-automatic single-shot tool, the JobMaster delivers reliable performance for timber-to-concrete and timber-to-steel applications.
“If you want a tool that delivers solid performance at a more accessible price point, the JobMaster is the way to go,” Simon said.
“It’s capable of firing up to 75mm nails and uses our LDU and LW range, which includes standard single-shot nails and washered nails.
“In terms of applications, it’s very versatile.
“It can be used across residential work, MEP installations, track and partition work, as well as fixing into concrete and steel.”
Adjustable load strength allows the user to tailor the power output.
It also has a silence, which helps reduce noise levels on site,” Simon added.
“Obviously, you still need to follow PPE and safety requirements, but it helps address OHS concerns around noise.”
Together, tools like the FrameBoss XPM and JobMaster highlight the ongoing relevance of powder-actuated technology in modern construction.
Stock up for EOFY
The end of financial year is the ideal time to invest in new tools — and potentially claim the cost back at tax time.
Through the Instant Asset Write-Off, eligible tradies can claim a full tax deduction on tools costing under $20,000, provided they’re purchased and ready for use before 30 June 2026.
That means buying a Ramset tool — putting it straight to work on site — and claiming the cost when tax time rolls around.
Claim the full cost If your business has an annual turnover of less than $10 million, the Instant Asset Write-Off allows you to deduct the full cost of eligible assets under $20,000 in the same financial year they’re purchased.
That includes new or used trade tools.
Instead of spreading the cost over several years through depreciation, the purchase can be claimed in one hit.
To take advantage of the Instant Asset Write-Off,
tools must be purchased and ready for use before 30 June 2026.
For tradies planning equipment upgrades, acting before the deadline could help improve productivity on site while delivering a valuable tax benefit.
Hardcore
Combining extreme power with efficient direct fixing, Ramset’s PA tools provide tradies with a fast, reliable solution for tackling structural installations in concrete and steel environments.
With lightweight designs, impressive autonomy and consistent power across demanding materials, Ramset’s gas-powered tools are helping tradies work faster, safer and more efficiently across a wide range of construction applications.
Check out here to see the full range
